CEMS - CEM SAFE
Emission
CEMS - CEM SAFE
Emission
- Solutions
- Emission
- CEMS - CEM SAFE
Online Flue Gas Analysis System for Continuous and Simultaneous Measurement of More than Four Parameters
Measurement Principles : | SO2, NO, CO, CH4: Non-Dispersive Infrared (NDIR)CO2: Dual beam NDIRO2: Electrochemical |
Component Minimum and Maximum Range : | SO2 0-200 ppm 0-5% NO 0-200 ppm 0-5% NO2 0-200 ppm 0-500 ppm CO 0-200 ppm 0-5% CH4 0-500 ppm 0-10% CO2 0-200 ppm 0-100% O2 0-5% 0-25% |
Accuracy : | SO2, NO, NO2, CO, CH4, CO2: 2% of Full Scale (FS) O2: 3% of FS |
Repeatability : | ≤ 1% FS |
Response Time (T90) : | 15 seconds (90% response from gas inlet) |
Sample Gas Flowmeter : | Built-in |
Ambient Temperature : | −5°C to 45°C |
Relative Humidity : | ≤ 95% (non-condensing) |
Structure : | Indoor type with steel case |
Mounting Method : | 19” rack mount, panel mount or desktop |
Power Supply : | 110 to 220 VAC, 50/60 Hz |
Dimensions : | 485 mm (L) x 415 mm (W) x 132 mm (H) |
Mass : | Approximately 18 kg |
Flow Rate : | 0.7 to 1.2 L/min |
Temperature : | 0 to 50°C |
Pressure : | 2 to 50 kPa |
Dust Particle Size : | 1 μm or smaller |
Notes : | Measurement range can be customised based on specific requirements. |
Not Added
There is a touch display that shows all the data from the field.
It has a feature for remote diagnostics.
It uses Modbus RS485 and RS232 for real-time data communication.
It includes a gas flow meter and a needle valve to control the gas flow, plus an internal filter to keep the gas sensor clean.
It has a built-in device to adjust for water vapour, which helps improve measurements, especially for SO₂ and NO.
Monitoring industrial production processes.
Checking the efficiency of industrial combustion.
Monitoring the desulfurization process.
Monitoring the denitration process.
Monitoring industrial furnaces.
Monitoring cement plants.
Monitoring industrial coal-fired boilers.
Checking process control functions.
Monitoring the atmosphere during steel heat treatment.
Monitoring incinerators.
Other Products
Solutions
Popular models high attention products from various segment
ONMS Noise Monitoring System Class -I
Real- time noise
monitoring with instant
data communication.